Solution Construction LLC



Land Surveying Services

Basement waterproofing refers to the methods and materials used to keep water out of a
building’s basement.
Basement Waterproofing refers to the methods and materials used to keep water
out of a building’s basement. Sealing materials drains, and sump pumps, among
other things, may be required to waterproof a basement that is below ground level.
Basements are particularly susceptible to wetness and moisture buildup.
Hydrostatic Pressure is exerted beneath basement floors and walls due to water in
the soil.

Water can be forced into fractures by this hydrostatic pressure, causing serious
structural damage as well as mould, rot, and other moisture-related issues.
Improper soil and drainage systems, poorly installed and maintained gutters, an
improper slope, hydrostatic pressure and condensation, and other factors all
contribute to this. Basement Waterproofing is designed to prevent all of these

Exterior Basement waterproofing

The exterior basement waterproofing method coats the outer basement walls with
polymers and membranes to prevent water from causing serious structural damage
to the building. Polymer-Based Waterproofing Solutions may be sprayed directly
onto a wall, cure quickly, and are semi-flexible enough to allow for some substrate

Interior Basement Waterproofing

When condensation is the primary source of moisture, interior basement
waterproofing with coatings is successful. It also works if the problem is caused by
minor wetness. One of the most efficient ways to save your basement is to install a
backwater valve.
Installing a drainage system is the ultimate solution to Interior Basement
Waterproofing. There are a variety of ways and materials that can be used.
A French drain with a sump pump, rubber walls, water weeping tiles, and a drainage
membrane is one proper alternative. This method allows water to flow freely without
causing damage to the walls.

Because water can seep in through cracks in the foundation and inefficient heating

or cooling can generate a buildup of moisture or condensation, your basement is

especially sensitive to water damage.

As a result, Basement Waterproofing is critical. Its benefits are Improved indoor

climate, Protection for the Basement Floor, Your sump pump will be protected,

Defend against structural deterioration and Lower Your Energy Bills

What is the Proper Solution for Basement Waterproof?

When it comes to keeping your basement safe, there are numerous variables to
consider. The scenario may be different, prevention is preferable to repair.
Make an appointment with Solution construction LLC and secure your foundation
and basement.

What Are Common Signs of Basement Water Issues?

Many basement water issues are easy to spot, since water isn’t supposed to be in
your home, but some very common signs include:
● Mold and mildew growth
● Cracks in walls or floors
● Standing water
● Corroded power outlets or rotting wood beams
Noticing these signs early can help you avoid serious foundation and basement
problems later on.

What Causes Basement Water Problems?

There are many causes of water in the basement, especially if you live in a
particularly rainy or wet area. Some common causes include:
Moisture condensation – this happens when warm, moist air meets your home’s cool
foundation walls, resulting in noticeable wet spots on basement floors and walls.
Groundwater will swell once the ground has absorbed as much water as it can. The
soil around your foundation cannot absorb the extra water. 

As a result, water runoff
can come in contact with your foundation, causing more problems in your basement.
Water runoff – when we have weather events such as snow and rain, a percentage
of water seeps into the ground. Any of this water that is not absorbed is called runoff.
Runoff that is not diverted away from your home properly causes hydrostatic
pressure to build up against your home’s foundation walls and floor. This forces the ater through cracks and gaps. 

You may notice water seeping up from the joints between the wall and the floor.
If you know the causes of basement water problems, you’ll be more prepared to
notice the signs and inspect your basement after a large storm or rainy season.

Why basement walls are important?

Basement walls are an important part of a strong, stable foundation. They create an
air space between the dirt and the basement walls, which helps to insulate the house
from the cold ground temperature. Underground, there’s usually a layer of frozen soil
that can get as cold as 32 degrees below zero in some climates.

 The dirt preventing
your basement walls from getting in direct contact with the soil can help to prevent
the moisture in the surrounding soil from seeping into your basement through cracks
or holes in your walls. The space between your basement walls also enables you to
install sheetrock on every side of your basement, which is necessary for creating a
finished home theatre. 

If you want to ensure a proper foundation for your building
and prevent mould and mildew from forming behind your walls, you should choose
A1 masonry contractors for your next home improvement project.

The basement wall construction is based on a concrete foundation wall with wood
framing for support. The wood framing consists of horizontal 2″x4″ studs with vertical
2″x4″s attached at right angles as cross braces. The horizontal members are fixed
onto brackets that are set into holes in concrete blocks or poured into masonry
anchors on top of the blocks.

Get a free quotes

Contact Form Demo

Excellence skills & Quality work

For further inquiries call